Classification of Elements and Periodicity in Properties Class 11 Notes Chemistry Chapter 3

Introduction, Periodic Table, Mendeleev’s Periodic Table, Moseley’s Modern Periodic Table, IUPAC Nomenclature, Periodic Properties, Valency

Introduction

In the previous chapter, we have discussed about Structure of Atom Class but in this chapter, we shall study about Classification of Elements and Periodicity in Properties. Classification of elements was proposed in order to study all the elements in a systematic manner. In this Unit, we shall study the development of the Periodic Law and the Periodic Table. Mendeleev’s Periodic Table was based on atomic masses. Modern Periodic Table arranges the elements in the order of their atomic numbers in seven horizontal rows (periods) and eighteen vertical columns (groups or families).

Why Do We Need Classification?

Elements are the basic units of all types of matter. At present, 118 elements are known. With such a large number of elements, it is very difficult to study individually the chemistry of all these elements and their number of compounds. So to make the study of chemistry simpler, scientists searched for a systematic way to organise their knowledge by classifying the elements. Main aim behind this classification was to keep the elements of same properties together, so that by studying one element out of that group, we can have general idea about the properties of all the elements in that group.

Periodic Table

Periodic table may be defined as the tabular arrangement of elements in such a way that the elements having same properties are kept together.

Dobereiner’s Triads Law

1st attempt towards the classification of elements was made by Johann W. Dobereiner in 1817. He arranged elements in the groups of three and in such a way that the atomic weight of middle element was equal or nearly equal to the average of atomic weights of other two elements.

Classification of Elements and Periodicity in Properties Class 11 Notes

Drawback : Only limited triads were arranged in this pattern.

Newland’s Law of Octaves

In 1865, John Newland observed that in a series of elements arranged in the increasing order of atomic weights, 1st and 8th elements have same properties. Now, a days, 1st and 9th elements have same properties in that series because noble gases were discovered late.

Classification of Elements and Periodicity in Properties Class 11 Notes

Mendeleev’s Periodic Table

“The physical and chemical properties of elements are a periodic function of atomic weights”.

Mendeleev arranged elements in horizontal rows and vertical columns of a table in order of their increasing atomic weights in such a way that the elements with similar properties occupied the same vertical column or group. Vertical Colums are called groups which are numbered I to VIII group, each group is further subdivided into sub groups A and B. Horizontal rows are called periods.

Classification of Elements and Periodicity in Properties Class 11 Notes

Read also: Chemical Bonding and Molecular Structure Class 11 Notes Chemistry Chapter 4

Defects in Mendeleev’s Table

(i) Position of hydrogen : Position of hydrogen was not justified.

(ii) Position of isotope : Isotopes should be placed separately according to periodic law. But actually one place was given to all isotopes of an element.

(iii) Cause of periodicity : Mendeleev could not explain why elements exhibit a periodicity in their properties when arranged in the order of increasing atomic weight.

(iv) Anomalous pairs of elements : Some anomalous pairs were present in table. As Tellurium (128 u) comes in VI group before Iodine (127 u).

Moseley’s Modern Periodic Table

“The physical and chemical properties are the periodic function of their atomic numbers”.

The long form of periodic table, also called Modem Periodic Table, is based on Modern periodic law. In this table, the elements have been arranged in order of increasing atomic numbers.

A modern version, the so-called “long form” of the Periodic Table of the elements, is the most convenient and widely used. The horizontal rows are called periods and the vertical columns, groups. Elements having similar outer electronic configurations in their atoms are arranged in vertical columns, referred to as groups or families. According to the recommendation of International Union of Pure and Applied Chemistry (IUPAC), the groups are numbered from 1 to 18 replacing the older notation of groups IA … VIIA, VIII, IB … VIIB and 0.

There are altogether seven periods. The period number corresponds to the highest principal quantum number (n) of the elements in the period. The first period contains 2 elements. The subsequent periods consists of 8, 8, 18, 18 and 32 elements, respectively. The seventh period is incomplete and like the sixth period would have a theoretical maximum of 32 elements. In this form of the Periodic Table, 14 elements of both sixth and seventh periods (lanthanoids and actinoids, respectively) are placed in separate panels at the bottom.

Classification of Elements and Periodicity in Properties Class 11 Notes

Read also: Motion in a Straight Line Class 11 Physics notes Chapter 3

IUPAC Nomenclature of Elements

The IUPAC names are derived by using roots for three digit atomic number of the elements.

Classification of Elements and Periodicity in Properties Class 11 Notes

A systematic nomenclature be derived directly from the atomic number of the element using the numerical roots for 0 and numbers 1-9. The roots are put together in order of digits which make up the atomic number and “ium” is added at the end. The IUPAC names for elements with Z above 100 are shown below :

Classification of Elements and Periodicity in Properties Class 11 Notes

Read also: Conceptual Questions for Class 11 Physics Chapter 3 Motion in a Straight Line

Division of Elements into Blocks

s-block

The elements of Group 1 (alkali metals) and Group 2 (alkaline earth metals) which have ns1 and ns2 outermost electronic configuration belong to the s-Block Elements.

Characteristics of s-Block elements

  1. Except Be and Mg, all impart characteristic colour to the flame.
  2. These have low ionisation energy.
  3. These are highly reactive.
  4. These are the highly electropositive elements.
  5. All the elements are soft metals.
  6. They have low melting and boiling points.

p-block

The p-Block Elements comprise those belonging to Group 13 to 18 and these together with the s-Block Elements are called the Representative Elements or Main Group Elements. The outermost electronic configuration varies from ns2np1 to ns2np6 in each period.

Characteristics of p-Block elements

  1. The compounds of p-block elements are generally covalent although their ionic character increases down the group.
  2. From left to right 13 to 18, reducing character decreases.
  3. The p-block elements generally show more than one oxidation state.
  4. The reactivity of elements in a group generally decreases downwards.
  5. At the end of each period is a noble gas element with a closed valence shell ns2 np6 configuration.

d-block

These are the elements of Group 3 to 12 in the centre of the Periodic Table. These are characterised by the filling of inner d orbitals by electrons and are therefore referred to as d-Block Elements. These elements have the general outer electronic configuration (n-1)d1-10ns0-2.

Characteristics of d-Block elements

  1. They are all metals with high melting and boiling points.
  2. The compounds of the elements are generally paramagnetic in nature.
  3. They mostly form coloured ions, exhibit variable valence (oxidation states).
  4. They are of tenly used as catalysts.
  5. These elements have high melting point.

f-block

The two rows of elements at the bottom of the Periodic Table, called the Lanthanoids, Ce(Z = 58) – Lu(Z = 71) and Actinoids, Th(Z=90) – Lr (Z=103) are characterised by the outer electronic configuration (n-2)f1-14(n-1)d0–1ns2. The last electron added to each element is filled in f-orbital. These two series of elements are hence called the Inner-Transition Elements (f-Block Elements).

Characteristics of f-Block elements

  1. All actinoids are radioactive. Elements after uranium are known as transuranium element.
  2. They form coloured compounds.
  3. These two series of elements are called Inner Transition Elements (f-Block Elements).
  4. They are all metals. Within each series, the properties of the elements are quite similar.
  5. They generally have high melting and boiling points.

Periodic Properties

The properties which generally have a regular trend along a group or period are called periodic properties. These are as given below :

  1. Atomic size
  2. Ionisation energy
  3. Electron gain enthalpy
  4. Electronegativity

(i) Atomic Size

Atomic Radius is the distance from the centre of the nucleus to the outermost shell containing electron.

Ionic Radius

The ionic radii can be estimated by measuring the distances between cations and anions in ionic crystals. In general, the ionic radii of elements exhibit the same trend as the atomic radii.

Cation: The removal of an electron from an atom results in the formation of a cation. The radius of cation is always smaller than that of the atom.

Anion: Gain of an electron leads to an anion. The radius of the anion is always larger than that ‘ of the atom.

(ii) Ionisation energy

It is the amount of energy required to remove the outer most electron from an isolated atom in its gaseous state. It is the measured in the unit of kJ/mole. It is denoted by (∆iH).

M(g) - e- ⟶ M+(g)

(iii) Electron gain enthalpy

It is the enthalpy change when an electron is added to the gaseous neutral atom. Electron gain enthalpy provides a measure of the ease with which an atom adds an electron to form anion. It is the measured in the unit of kJ/mole. It is denoted by (∆egH).

X(g) + e- ⟶ X-(g)

(iv) Electronegativity

Electronegativity is a measure of the tendency of an element to attract bonded electron pair towards itself in a covalently bonded molecule.

Periodic Trends in Chemical Properties along a Period

  1. Metallic character: It decreases across a period, maximum on the extreme left (alkali metals).

  2. Non-metallic character: It increases along a period, from left to right.

  3. Atomic Size: It decreases across a period.

  4. Ionisation energy: It increases along a period.

  5. Electron gain enthalpy: It increases along a period.

  6. Electronegativity: It increases along a period.

  7. Basic nature of oxides: It decreases from left to right in a period.

  8. Acidic nature of oxides: It increases from left to right in a period.

Variation in Chemical Properties along a a Group

  1. Metallic character: Generally increases because increase in atomic size and hence decrease in the ionizatiorn energy of the elements in a group from top to bottom.

  2. Non-metallic character: It generally decreases down a group. As electronegativity of elements decreases from top to bottom in a group.

  3. Atomic Size: It increases along a group.

  4. Ionisation energy: It decreases across a period.

  5. Electron gain enthalpy: It decreases across a period.

  6. Electronegativity: It decreases across a period.

  7. Basic nature of oxides: Since metallic character or electropositivity of elements increases in going from top to bottom in a group basic nature of oxidise naturally increases.

  8. Acidic character of oxides: It generally decreases as non-metallic character of elements decreases in going from top to bottom in a group.

  9. Reactivity of metals: It generally increases down a group. Since tendency to lose electron increases.

Classification of Elements and Periodicity in Properties Class 11 Notes

Summary

  1. Periodic table : Arrangement of elements in the increasing order of atomic number such that elements with similar properties fall under same vertical column.

  2. Group : A vertical column of elements in the periodic table.

  3. Period : A horizontal row of elements in the periodic table.

  4. Long form of periodic table has 18 groups and 7 periods. Sixth period is the longest and first period is the smallest.

  5. s-Block elements : Elements of groups 1 and 2. Their general valence shell electronic configuration is ns1–2.

  6. p-Block elements : Elements of groups 13, 14, 15, 16, 17 and 18. Their general valence shell electronic configuration is ns2np16.

  7. d-Block elements : Elements of groups 3, 4, 5, 6, 7, 8, 9, 10, 11 and 12. Also known as transition elements. Their general valence shell electronic configuration is (n–1)d1–10 ns1–2. 46Pd is exception (4d10 5s0).

  8. f-Block elements : The two horizontal rows of elements at the bottom of the table. Also known as inner transition elements. Their general valence shell electronic configuration is (n–2)f1–14 (n–1)d0–1 ns2.

  9. Covalent radius : Half of the internuclear distance between two atoms of the element held by a single covalent bond.

  10. Van der Waal’s radius : Half of the internuclear distance between two nearest atoms belonging to two adjacent molecules in solid state.

  11. Metallic radius : Half of the internuclear distance between two nearest atoms in the metallic lattice.

  12. Isoelectronic ions : The ions having same number of electrons but different nuclear charge. Example : (i) N3–, O2–, F, Na+, Mg2+, Al3+; (ii) P3–, S2–, Cl, K+, Ca2+, Sc3+

  13. Among isoelectric ions, greater the nuclear charge smaller is the size.

  14. Ionization enthalpy : The minimum amount energy required to remove the outermost electron from an isolated gaseous atom of the element.

  15. Ionization enthalpy increases along the period and decreases down the group.

  16. Be, Mg, N, P and noble gases have exceptionally high values of ionization enthalpies due to their stable electronic configurations.

  17. Electron gain enthalpy : The enthalpy change taking place when an electron is added to an isolated gaseous atom of the element.

  18. Electron gain enthalpy becomes more negative as we move along the period and becomes less negative down the group.

  19. Successive electron gain enthalpies are always positive.

  20. Helium has the highest value of ionization enthalpy in periodic table.

  21. Chlorine has the highest negative electron gain enthalpy in periodic table.

  22. Electronegativity : It is the tendency of an atom in a molecule to attract towards itself the shared pair of electrons.

  23. Fluorine is the most electronegative element whereas Caesium is the least electronegative element in periodic table.

  24. Unlike ionisation energy and electron affinity, electronegativity is the property of atom of an element in combined state.

  25. Electropositive or metallic character is related to the ionisation energy of the element. The elements having low I.E. are more electropositive or more metallic in character.

  26. Valence of an element belonging to s or p-block is either equal to the number of valence electrons or eight minus the number of valence electron.

  27. The chemical reactivity is maximum at the two extreme ends of the periodic table and is least in the centre.

  28. Among alkali metals reactivity increases on descending the group while among halogens the reactivity decreases on descending the group.

  29. The basic character of oxides decreases while the acidic character increases on going from left to right in a period.

  30. Oxides of metals are generally basic while that of non-metals are acidic in nature.

  31. The similarity between a pair of elements in period second and third located diagonally in the periodic table is called the diagonal relationship.

Read also

إرسال تعليق

© Samar Education All rights reserved. Distributed by SamarEducation